AEG LAVAMAT W 1200 MANUAL MANUAL

Check the drainage hose for possible kink or twist. If the drain hose has been extended as shown in the above installation diagram, check the place where the hoses are connected (due to the reduced flow diameter, it is more likely to be blocked)Д¦. If the washing machine is working correctly after the test wash, it may indicate that the siphon/outlet is clogged - make sure the siphon/outlet is clearДҐ. Try a wash with the drain hose in a bowl or sink.

AEG LAVAMAT W 1200 MANUAL MANUAL

Then start a hot wash without adding any soap powder to clean out the drainage system.ДЇor detailed procedure refer to the user manual supplied with your appliance.Д¬heck the hose connected to the sink trap, and check if the sink is draining normally to rule out the blockage.Д¬heck whether the drains are draining satisfactorily. Refer to the installation instructions in your user manual or separate installation leaflet supplied with your appliance.Д¬lean the pump and fluff filter, including the pump blade (if the pump blade is visible, rotate it with a pencil and refit the filter). The height of the drain must be no more than 100 cm and no less than 60 cm above the base of the machine or as shown in the user manual. Refer to the installation instructions in your user manual or separate installation leaflet supplied with your appliance. The drain hose should extend no more than 10 cm down into the drain. Ensure the drain hose is in the correct position Front loader washing machine (integrated and freestanding)ДЎ.The appliance makes an unusual noise because of the blockage of the drain pump.Washing machine displays error message E20, E21 or C2, emits 2 beeps or 2 flashes.

Aeg lavamat w 1200 manual